Description: vacuum plant creates vacuum in a block-form. Using of vacuum allows to increase blocks' forming capability.
Appointment: plant is necessary for speed-up cooling of formed blocks after steam processing.
Principe of work:
Modernization: vacuum accumulator is used for vacuum accumulating, worked out by vacuum plant.
Technical features:
Name of parameter |
Meaning |
|
1 |
Most suction pressure, MPa, not less (barometric pressure vacuum, %) |
0,04 |
2 |
Nominal capability by maximal suction pressure, m3/min |
3,2 |
3 |
Quantity of water given to pumping element, l/min |
7 |
4 |
Temperature of water , C, not more |
20 |
5 |
Dimension size, mm: width |
|
6 |
Mass, kg |
340 |
Electric equipment features |
||
7 |
Power current type |
Variable three-phase |
8 |
Nominal current frequency, hertz |
50 |
9 |
Nominal circuit pressure, W |
380 |
10 |
Quantity of electric engines in installation |
1 |
11 |
Nominal drive power, kW |
7,5 |
12 |
Model and type of engine |
AIRM13254 UZ |
Photo: vacuum plant used in polyfoam producing and air-accumulator.
Copyright 2007 PENOCEH - Equipment for Polyfoam Producing. All rights reserved.
Контактный телефон (8332) 58-31-22, 58-43-43 info@penoceh.ru, www.penoceh.ru
